Abro Spray Paint Material Safety Data Sheet — Instant
Here is the essential content you would typically find in a Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) for ABRO Spray Paint (e.g., ABRO Super Gloss or general-purpose aerosol enamel).
Skin/Eye Contact: May cause serious eye irritation and skin irritation or dermatitis upon repeated exposure. abro spray paint material safety data sheet
Engineering controls: Local exhaust ventilation (e.g., spray booth) to keep vapors below PEL/TLV.
Personal protective equipment (PPE):
8. Exposure Controls / Personal Protection
- Engineering Controls: Use local exhaust ventilation or spray booths.
- PPE (Personal Protective Equipment):
Skin/Eye Contact: Flush affected areas with plenty of water for at least 10–15 minutes. Remove contaminated clothing and wash before reuse. Here is the essential content you would typically
2.1 Flammability (Extreme Danger)
- Flammable Aerosol – Category 1: Contains up to 85% propellant (propane, butane, or dimethyl ether) mixed with volatile solvents like acetone, xylene, and toluene.
- Flash Point: Typically below -20°C (-4°F), meaning the liquid can ignite at almost any ambient temperature.
- Risk: Explosive vapor-air mixtures can form in poorly ventilated spaces. Vapors travel along floors or ground to distant ignition sources (pilot lights, static electricity, power tools).
- Flame: Flammable gas and liquid.
- Health Hazard: May cause allergic reaction or organ damage.
- Exclamation Mark: Skin/eye irritation or acute toxicity.
- Acetone (CAS 67-64-1)
- Butane (CAS 74-98-6)
- Dimethyl Ether (CAS 115-10-6)
- Ethanol (CAS 64-17-5)
- Propane (CAS 74-86-2)
- Resins and pigments (proprietary)
Flash Point: For certain formulations, the flash point can be as low as -29°C (-20.2°F). Solubility: Generally insoluble in water. 3. Safe Handling & Storage Engineering controls: Local exhaust ventilation (e