Arduino Sensor Shield V5.0 is an expansion board designed to streamline the wiring of complex projects by providing dedicated power, ground, and signal pins for every I/O port. By mounting this shield directly onto an Arduino Uno or Mega, you eliminate the need for cluttered breadboards and unstable jumper wire connections. Core Functionality & Layout
Jumper connecting "5V" to "Servo VCC" (Default): arduino sensor shield v5 0 manual
If you are diving into the world of Arduino robotics or environmental sensing, you have likely encountered a frustrating problem: managing wires. Connecting a single LED or a button is easy. Connecting 10 sensors—a ultrasonic distance sensor, a servo motor, a temperature sensor, and an LCD display—results in a nest of jumper wires that looks like a bowl of tangled spaghetti. Arduino Sensor Shield V5
int readUltrasonic() digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); long duration = pulseIn(echoPin, HIGH); int distance = duration * 0.034 / 2; return distance; Bluetooth / Serial (Center edge): A 4x2 pin
Jumper Removed: The digital pin "V" pins are isolated from the Arduino. You must provide external power (typically 5V–6V) via the blue screw terminals to power high-draw devices like servo motors. Technical Specifications Sensor Shield for Arduino UNO - Rajguru electronics
Let’s solidify the manual with a real project. You will build a radar-like sensor that sweeps a servo back and forth while reading an ultrasonic sensor.