Chaser Che80 Print Driver

Mastering the Chaser CHE80 Print Driver: A Complete Setup and Troubleshooting Guide

Issue 4: Half the label prints, then stops

• Cause: Driver “Page Size” doesn’t match actual label dimensions.
• Fix: In Control Panel > Devices and Printers > Right-click CHE80 > Printer Preferences > Advanced > Paper Size. Create a Custom Size (e.g., Width: 80mm, Height: 50mm). Apply to “All applications.”

: The most common issue is selecting a COM port when you are using USB. Go to Printer Properties > Ports and ensure a USB Virtual Port is checked. chaser che80 print driver

: Usually USB, though some versions include LAN (Ethernet) or Bluetooth. Mastering the Chaser CHE80 Print Driver: A Complete

(often designated as USB001 or USB002) in the "Devices and Printers" settings. Microsoft Support Troubleshooting the "Driver Unavailable" Error Cause: Driver “Page Size” doesn’t match actual label

3. Printer Preferences

• Paper Size: Ensure "Roll Paper 80 x 80 mm" or "58mm" (if using a 58mm paper guide).
• Print Density: Set to 'Medium' for longevity; 'Dark' for faded receipts.
• Cutter Option: Choose "Partial cut" (leave a small tab) or "Full cut."

Installing the Chaser CHE80 is usually straightforward. Follow these steps for a clean setup: Step A: Physical Connection

Since "Chaser" is often a regional brand name for hardware manufactured by companies like

to communicate. If your computer detects the printer as an "Unknown Device" or "USB Serial Port," you may need to install the CH341SER driver Installation Steps Physical Connection