Digi Sm 5000 Scale User Manual [upd] May 2026

The DIGI SM-5000 series scale (specifically models like the ) is often supported by manuals shared with the SM-5500 series due to their similar PC-based architecture. Available Manuals & Documentation

• Clean after each use: Wipe the platform with a damp cloth. Do not submerge. For wet environments (fish/meat), use a food-grade sanitizer.
• Avoid shock loads: Do not drop items onto the platform from a height. This damages load cells.
• Battery care: If your model has a rechargeable battery, fully discharge and recharge once per month to maintain capacity.
• Annual service: Have a certified technician check linearity and repeatability.
• Storage: If storing for >30 days, remove batteries (if applicable) and cover the scale to prevent dust ingress.

and built-in audio/visual guidance for intuitive operation. While full original manuals are often hosted on professional service sites, the following guide covers essential setup, programming, and troubleshooting steps. DIGI (TERAOKA) Initial Setup and Basic Operation Powering On : Plug in the power cord and press the digi sm 5000 scale user manual

Final Notes & Support

The Digi SM 5000 is a workhorse of the industrial weighing world. By mastering the functions in this guide—especially taring, parts counting, and checkweighing—you will significantly improve your workflow efficiency. The DIGI SM-5000 series scale (specifically models like

• Grams (g)
• Kilograms (kg)
• Pounds (lb)
• Ounces (oz)
• Carats (ct)

3.2 Preset Tare Memory (for multiple fixed containers)

1. While in weighing mode, place the first container on the platform.
2. Press and hold a numeric key (e.g., 1) for 3 seconds. The scale stores that container’s weight.
3. Later, simply press key 1 to automatically tare that container.

• kg (kilograms, default)
• g (grams, for small precision)
• lb (pounds)
• oz (ounces)

Quick Fixes for Common Issues

• Display not turning on: Check power outlet, fuse, or battery polarity.
• Reading drifts slowly: Warm up the scale for 15-30 minutes before precision work (load cells stabilize with temperature).
• Scale shows “Out2” or similar: Indicates calibration data lost – perform full calibration.

The manual goes a step further by offering solution trees—decision diagrams that guide you through checking power connections, cleaning the load cell area, or resetting the scale to factory defaults. This section alone can save hours of downtime and avoid unnecessary service calls. Clean after each use: Wipe the platform with a damp cloth