32 To 100 Instructions Portable Link: Equatech Universal Tv Wall Mount

Equatech Universal TV Wall Mount (32" to 100") heavy-duty bracket that supports up to

  • Wood Studs: Drill pilot holes using a drill bit slightly smaller than the lag bolts provided.
  • Concrete: Drill holes using a masonry bit and insert the expansion concrete anchors provided.

Unlike permanent mounts that require unscrewing four bolts to remove the TV, the Equatech allows you to slide the TV off the wall plate in seconds. This means you can: Equatech Universal TV Wall Mount (32" to 100")

Phase 1: Preparation

  1. Unpack: Lay the mount on a flat surface. Verify all hardware bags are present (Bolts A, B, C, Washers, Spacers).
  2. TV Preparation: Lay the TV face down on a soft surface (carpet or blanket). Locate the four threaded holes on the back of the TV.
  3. Determine Hardware: Insert a screw from the kit into the TV holes to test the fit.
    • Attach the TV plate to the back of your TV, following the VESA pattern. Use the provided screws.
    • Ensure the TV plate is centered and secure.

    Equatech Universal TV Wall Mount a heavy-duty solution designed to support large screens ranging from 32" to 100" with a maximum weight capacity of Wood Studs: Drill pilot holes using a drill