Fnirsi-1014d Firmware Update [2021] May 2026

To update the firmware on your FNIRSI-1014D digital oscilloscope, follow these steps to ensure a safe and successful installation. Note that using the wrong firmware file can cause display issues like a shifted screen. Preparation Download the Firmware : Visit the FNIRSI Software Downloads page or the Manuals & Firmwares section to find the latest official Verify File Name : The firmware file must be named FSI-1014.bin for the device to recognize it during startup. Hardware Connection

: FNIRSI used two different screen hardware versions for the 1014D. Each version requires a specific variation of the firmware. fnirsi-1014d firmware update

is the most recent official version, though users should be cautious as there are two distinct versions of V3.0 tailored for different internal screen hardware; using the incorrect version may cause a "screen shift" where the display output is misaligned. Update Procedure (Step-by-Step) : Visit the FNIRSI Software Downloads page or contact their support to obtain the correct FSI-1014.bin USB Type-A to Type-A cable to connect the oscilloscope to your computer. USB Export Mode : On the oscilloscope, navigate to MENU > USB export To update the firmware on your FNIRSI-1014D digital

Updating the firmware of your FNIRSI-1014D oscilloscope is a relatively straightforward process. Here's a step-by-step guide: Last resort: Contact FNIRSI support directly via their

A common problem after updating is the screen content shifting to the left or right, leaving part of the interface cut off.

Restart: Disconnect the USB cable, power the device off, and then power it back on .