To program the Hytera BD615 , you need the specific Customer Programming Software (CPS)

  1. Download and Install the Software: Download the software from the Hytera website or other authorized sources. Install the software on your computer, following the on-screen instructions.
  2. Connect the Radio to the Computer: Connect the BD615 radio to your computer using a programming cable.
  3. Launch the Software: Launch the programming software and select the BD615 model from the list of supported devices.
  4. Read the Radio's Current Configuration: The software will read the radio's current configuration and display it on the screen.
  5. Make Changes to the Configuration: Make changes to the configuration as needed, using the software's intuitive interface.
  6. Write the New Configuration to the Radio: Once you have made the necessary changes, write the new configuration to the radio.

2. Hardware Requirements

To connect the software to the radio, you need the correct physical interface.

1. Where to Find the Software

The software is officially known as Hytera CPS (BD series).

Custom Frequencies: Dial in exact licensed frequencies to eliminate cross-talk and outside interference.