I Download Fixed Driver Cutting Plotter Jinka 1351 Link | RECOMMENDED |

Downloading and installing the "fixed" or correct driver for the Jinka 1351

Here are the three safest sources for the Jinka 1351 fixed driver:

Port Settings: In your software's "Vinyl Spooler" or "Setup" menu, ensure the following match your Device Manager settings: Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None (or Hardware) Troubleshooting Tips

Even with the "fixed" driver, certain hardware and software conflicts can interrupt the cutting process: Driver Jinka 1351 28 - Facebook

Install the Driver: Open the downloaded file and follow the installation instructions.

Q5: What is the exact filename of the fixed driver? A: Based on successful user reports, search for Jinka_1351_Win10_Fixed_v2.1.inf or PL2303_GD_Fixed_2024.zip. The checksum is not standard, so trust the source.

  1. Download the .inf and .sys files (ensure they are dated 2021 or newer).
  2. Right-click the downloaded file -> Extract All.
  3. Open Device Manager.
  4. Right-click the unknown device -> Update driver -> Browse my computer.
  5. Let me pick from a list -> Have Disk -> Browse to the extracted folder.
  6. Select "USB Printing Support" or "WinUSB Device" (depending on your file).