Jmm-al10 Test Point Info

The JMM-AL10 is the model number for the Huawei Honor V9 Play (also known as the Honor 6C Pro in international markets).

What is JMM-AL10 Test Point?

is used to force the device into a special low-level mode (such as jmm-al10 test point

installed; otherwise, the PC will not recognize the connection. Battery Status

Wrong Port: If the device shows as "Unknown Device," the short-circuit contact might not have been firm enough during the plug-in. The JMM-AL10 is the model number for the

  • After shorting, the device should appear as HUAWEI USB COM 1.0 in Device Manager.

    • : The fingerprint sensor is attached to the motherboard via a fragile flex cable; do not pull the back cover away too quickly. Disconnect this cable first. : Disconnect the battery connector to prevent short circuits during the process. 2. Locating the JMM-AL10 Test Point

    Step-by-Step: Locating the JMM-AL10 Test Point

    Warning: Opening your device voids the warranty and risks physical damage (e.g., torn flex cables, short circuits). Proceed at your own risk. After shorting, the device should appear as HUAWEI

    Step 2: Remove the Mid-Frame (Plastic Covering)

    Once the back cover is off, you will see the battery and the main board. There is usually a plastic mid-frame held by screws.