Mag One A8 Programming Software: Motorola
The Motorola Mag One A8!
- Channel Info: Set your Transmit (TX) and Receive (RX) frequencies.
- CTCSS/DCS: Add privacy tones (PL/DPL) to prevent hearing interference from other users on the same frequency.
- Bandwidth: Select Narrowband (12.5 kHz) or Wideband (25 kHz). Note: Most modern licenses require Narrowband.
Programmable Buttons: Customizing the two side option buttons for shortcuts like channel scanning, nuisance channel delete, or monitoring current activity. motorola mag one a8 programming software
Conclusion
The Motorola Mag One A8 is a simple yet effective radio, but it relies on the Mag One CPS to be configured efficiently. By using the correct USB cable and navigating the straightforward CPS interface, you can precisely tune frequencies, set privacy tones, and ensure your fleet of radios operates seamlessly together. The Motorola Mag One A8
Motorola-specific
- Channel Number: 1
- Receive Frequency (MHz): 464.500
- Transmit Frequency (MHz): 464.500 (For simplex) OR 469.500 (For repeater offset).
- Rx CTCSS (Hz): 100.0 (To ignore others) or "None" for open squelch.
- Tx CTCSS (Hz): 100.0
- Bandwidth: 12.5 kHz (Narrow) for business use; 25 kHz (Wide) for amateur/HAM.
- Power Level: Low (Save battery) or High (Full range).
Official Software: The standard software for this series is typically found under the part number RVN5081. Channel Info: Set your Transmit (TX) and Receive
- Select the "Communications Port" tab.
- Select the COM port assigned to your USB cable. (You can find this in Windows Device Manager under "Ports (COM & LPT)").