Ms-7613 Ver 1.1 Motherboard Manual __exclusive__ May 2026

The Hewlett-Packard MS-7613 (Iona-GL8E) Motherboard Guide

If you are reading this, you likely have an older Hewlett-Packard (HP) desktop computer—such as a Pavilion, Compaq Presario, or HP 300/500 series—and you are looking for specifications, upgrade options, or troubleshooting advice for the motherboard stamped MS-7613 VER: 1.1.

Installing drives and front-panel connectors

  • Connect SATA cables from drives to SATA ports.
  • Connect 24-pin and 4-pin power cables from PSU.
  • Attach front-panel connectors: match Power SW, Reset SW, HDD LED, Power LED to header pins (refer to board silk-screen).
  • Correct standoff placement, CPU and cooler seated, thermal paste applied, RAM fully latched, power connectors attached, no foreign objects on board, case panels removed for first test.
  • CPU_FAN1 – 4-pin PWM fan header
  • ATX_PWR1 – 24-pin main power
  • ATX_12V1 – 4-pin CPU power (do NOT use 8-pin)
  • CPU and cooling:

    Part 7: Compatible Parts Guide (Manual-Based)

    The manual’s Qualified Vendor List (QVL) is outdated, but based on its electrical specs, here is modern (used market) compatibility: ms-7613 ver 1.1 motherboard manual

    • Adjust CPU FSB Frequency – Increments of 1 MHz. Do not exceed 400 MHz on standard cooling.
    • DRAM Frequency – Auto or forced 1066/1333.
    • Spread Spectrum – Disable if overclocking for stability.
    • JFP1 – Front panel header (Power SW, Reset SW, HDD LED, Power LED)
    • JFP2 – Speaker/buzzer
    • JAUD1 – Front audio (AC’97 or HD Audio selectable via jumper)
    • JUSB1 / JUSB2 – Two internal USB 2.0 headers (each supporting 2 ports)
    • JCOM1 – Serial port header
    • JLPT1 – Parallel port header