Onkyo RC-799M Remote Manual: A Complete Guide to Programming and Troubleshooting

If you own an Onkyo home theater receiver from the late 2000s or early 2010s—such as the TX-SR607, TX-SR578, or HT-RC160 models—you’re likely holding the RC-799M remote control. It’s a sleek, fully-featured universal remote, but finding the original printed manual can be a challenge.

Part 1: First Look – Design and Layout of the RC-799M

Before we dive into programming, let’s decode the physical interface. The Onkyo RC-799M is a pre-programmed learning remote with 8 device modes. It communicates via infrared (IR) and can control not only your Onkyo receiver but also your TV, cable box, Blu-ray player, and even a game console.

If you need to program the remote to control external devices (like a TV or DVD player), use the following steps: Assigning Device Codes:

  • Disable a Device Button: Accidentally hitting PHONO? You can lock it out. Press and hold the device button you want to disable and Enter for 3 seconds. Press 9, then 0. Repeat to re-enable.
  • Checking the Battery Level: Press Display + Enter. The LED will blink: 1 blink = Low, 2 blinks = Medium, 3 blinks = Good, 4 blinks = Full.

    • If the code is accepted, the REMOTE MODE button will flash twice.

    The manual for the Onkyo RC-799M remote control typically includes:

    You might also like

    Onkyo Rc-799m Remote Manual Better ✭ [SIMPLE]

    Onkyo RC-799M Remote Manual: A Complete Guide to Programming and Troubleshooting

    If you own an Onkyo home theater receiver from the late 2000s or early 2010s—such as the TX-SR607, TX-SR578, or HT-RC160 models—you’re likely holding the RC-799M remote control. It’s a sleek, fully-featured universal remote, but finding the original printed manual can be a challenge.

    Part 1: First Look – Design and Layout of the RC-799M

    Before we dive into programming, let’s decode the physical interface. The Onkyo RC-799M is a pre-programmed learning remote with 8 device modes. It communicates via infrared (IR) and can control not only your Onkyo receiver but also your TV, cable box, Blu-ray player, and even a game console. onkyo rc-799m remote manual

    If you need to program the remote to control external devices (like a TV or DVD player), use the following steps: Assigning Device Codes: Onkyo RC-799M Remote Manual: A Complete Guide to

  • Disable a Device Button: Accidentally hitting PHONO? You can lock it out. Press and hold the device button you want to disable and Enter for 3 seconds. Press 9, then 0. Repeat to re-enable.
  • Checking the Battery Level: Press Display + Enter. The LED will blink: 1 blink = Low, 2 blinks = Medium, 3 blinks = Good, 4 blinks = Full.
    • To program: Press Macro 1 + Enter (hold until LED blinks). Press up to 16 buttons. Press Macro 1 again to save.
    • To run: Simply press Macro 1.

    If the code is accepted, the REMOTE MODE button will flash twice. Disable a Device Button: Accidentally hitting PHONO

    The manual for the Onkyo RC-799M remote control typically includes: