Opti Combi Manual English | Prosecure

The Prosecure Opti series (Motion/Combi) is designed for automatic door operators, combining radar technology for motion detection with infrared technology for presence detection (in Combi models). The device is engineered to activate, open, and safeguard passage areas, complying with safety regulations like DIN 18650 and EN 16005. 2. Package Contents & Technical Specifications

Next Steps:

• Error code E01: Low water pressure – Check the water pressure and top it up if necessary.
• Error code E02: Gas supply issue – Check the gas supply and ensure that it is turned on.
• Error code E03: Electrical issue – Check the electrical connections and ensure that they are secure.

Upon power-up, the unit typically undergoes a self-test where the LED flashes (red/green) for approximately 10 seconds. Do not move in the detection field during this time Adjustments: Sensitivity: prosecure opti combi manual english

If two sensors are close together, change frequencies to avoid interference. 🔍 Troubleshooting Potential Cause Door stays open Object in safety zone Clear the threshold of mats or signs. Door opens/closes randomly Vibration or rain Lower Radar sensitivity or change tilt angle. LED flashing Red Internal error Cycle power (OFF/ON) or check wiring. No detection No power / Incorrect wiring Check 12-24V input at the terminal block. ⚠️ Safety Precautions Always perform a "walk test" after installation. The Prosecure Opti series (Motion/Combi) is designed for

Dorma Prosecure opti combi sensor/radar til skydedøre. - DanZafe Error code E01 : Low water pressure –