L3210 Adjustment Program | Reset Epson

Complete Write-Up: Epson L3210 Adjustment Program

1. Introduction

The Epson L3210 is a popular all-in-one Ink Tank System printer known for its low running costs. Like all inkjet printers, it uses an internal waste ink counter to track the amount of ink flushed into its maintenance box (waste ink pad). When this counter reaches a preset limit (usually around 95-100%), the printer stops functioning and displays a "Service Required" error (often indicated by blinking lights or an error message in the software).

Step 4: Select Printer Model

Note: You can also install an "external waste ink tank" – a hose that directs overflow into a bottle. This makes the reset permanently safe. Reset Epson L3210 Adjustment Program

: Obtain the Epson L3210 Adjustment Program (Resetter) from a source like or other trusted community links. Resetting via Adjustment Program Run the Software : Extract the downloaded ZIP file and run AdjProg.exe administrator Select Printer : Click the button. Choose from the "Model Name" dropdown and set the "Port" to Auto Selection Enter Adjustment Mode : Click on Particular Adjustment Mode Find Maintenance : Scroll down to the Maintenance section and select Waste ink pad counter , then click Check Counter : Tick the boxes for Main pad counter Platen pad counter Ink system pad counter (if available). Click to verify current usage levels. Initialize : With the boxes still checked, click the Initialization button. Click when prompted to confirm the reset. Complete Write-Up: Epson L3210 Adjustment Program 1

Using the Reset Epson L3210 Adjustment Program is relatively straightforward. Here are the steps: In the program, click "Select" next to "Model Name"

  1. Search for "cmd" → Right-click → Run as Administrator.
  2. Type: bcdedit /set testsigning on → Press Enter.
  3. Reboot your PC. You will see “Test Mode” in the bottom right corner.