L3150 Updated — Resetter Epson

To reset an Epson L3150 , you typically need to address either the Waste Ink Pad Counter (which triggers the "Service Required" error) or the Network Settings The most common "updated" method for the L3150 Resetter (also known as the Epson Adjustment Program ) is detailed below. 1. Resetting the Waste Ink Pad Counter

Resetting the software counter does not physically clean the ink pads. resetter epson l3150 updated

Epson printers include internal sponge-like pads that collect excess ink during setup and cleaning cycles. To prevent ink from leaking onto your desk, the printer is programmed to stop functioning once a built-in counter predicts these pads are full. To reset an Epson L3150 , you typically

Key Features of the Resetter

Step 1: Put the Printer into “Reset Mode”

• Turn off the printer.
• Hold the Stop button (red circle with triangle) and the Power button simultaneously.
• Release only the Power button when the printer starts, then release Stop after 5 seconds.
• The printer will enter a special mode (all lights flash or remain steady).