Richmond Water Heater Model 6g40-36f1 Manual -
Richmond 6G40-36F1 is a 40-gallon natural gas water heater from the "Essential" or "Integra System" line, manufactured by Richmond Water Heaters
- Turn gas knob to “PILOT.”
- Depress knob fully.
- Click the red igniter button repeatedly until pilot lights.
- Hold the knob for 60 seconds (NOT 30 as with older models) before releasing.
- Turn to “ON.”
Press and hold the knob down to allow gas flow to the pilot burner. richmond water heater model 6g40-36f1 manual
- Height: Approx. 60.5 inches
- Diameter: Approx. 20 inches
Features a Flammable Vapor Ignition Resistant (FVIR) design with an exclusive air/fuel shut-off device that disables the unit if flammable vapors are detected nearby. Easy Ignition: Richmond 6G40-36F1 is a 40-gallon natural gas water
3. Specifications
| Parameter | Value | |--------------------------|---------------------------------| | Model | 6G40-36F1 | | Tank capacity (US gal) | 40 | | Recovery @ 90°F rise | ~36 gal/hr (36k BTU) | | First hour rating | Approx. 68 gallons | | Energy factor (EF) | 0.59 (typical for atmos. vent) | | Vent size | 3″ or 4″ (check data plate) | | Gas type | Natural gas (factory) or LP (kit)| | Gas inlet pressure (Nat) | 5.0″ – 10.5″ WC | | Manifold pressure (Nat) | 3.5″ WC | | Anode rod | Magnesium (standard) | | Dimensions (H x W) | ~60″ × 20″ | Turn gas knob to “PILOT
This model is a natural gas, 40-gallon, atmospheric vent water heater, commonly installed in homes with 2-4 people. It is known for its energy efficiency (often meeting Energy Star criteria) and durable glass-lined tank.