Rm-0145 Manual New! -

The Go to product viewer dialog for this item. (frequently identified as the Go to product viewer dialog for this item.

Test buttons like Power, Volume, and Menu. If they don't work, repeat the process. Method 3: Manual Code Entry rm-0145 manual

Input terminals: Screw terminals for IN1–IN6 (plus common)

Output terminals: Screw terminals for OUT1–OUT4 (COM, NO, NC)

Analog input terminals: AIN1, AIN2 with jumper for voltage/current selection

Communication port: Screw-terminal RS-485 A/B and GND

Programming port: Micro-USB for local configuration and firmware updates

Expansion slot: For optional Ethernet or I/O expansion modules

Battery compartment: Access panel for RTC battery

Use this method if you do not have a code list or if the brand is unknown. Step 1: Turn on your TV and point the remote toward it. The Go to product viewer dialog for this item

Inspect device: ensure seal, connectors, and battery tab are intact.

Power-on: short the POWER pad for 2 seconds or insert battery; status LED flashes green once when boot completes.

Pair via BLE: open the RM-0145 mobile app (or BLE terminal); default device name RM-0145-XXXX, default PIN 0000.

Configure sampling: set sample interval (default 15 min) and transmission policy (store-and-forward or immediate).

Mount: use supplied gasketed screws; orient sensor face away from direct sunlight and with airflow for accurate ambient readings.

Verify: trigger a manual sample and confirm data appears in the cloud or on the local logger via UART readout.

Dimensions: 110 × 72 × 38 mm

Weight: 210 g (with battery)

Battery life: up to 5 years typical (15-min sampling, hourly transmit)

Memory: 32 GB flash, logs up to ~20 million binary records

Interfaces: UART (115200), I2C (100/400 kHz), BLE 5.0, optional LTE-M/NB-IoT

Protection: IP67, –40°C to +85°C

Rm-0145 Manual New! -

Discover more from Join Everyday 7:30 am ET