Ws-6933 Software Update ((link)): Satlink

Updating the software on a Satlink WS-6933 satellite finder is a critical maintenance task that ensures the device remains compatible with the latest satellite transponder data and operates with improved performance. This process involves connecting the device to a computer via USB and using specific flashing tools to upload new firmware. Importance of Software Updates

  • Execute the Update:

    that triggers when a signal is locked, helping you align dishes without constantly watching the screen Calculations : It can automatically calculate Azimuth (AZ) Elevation (EL) angles for easier satellite targeting satlink ws-6933 software update

    or turn off the device until the progress bar reaches 100% and a "Success" message appears. Once finished, restart the meter. Go back to System Setup to verify the new version number. Fujian Satlink Electronics Co., Ltd. 3. Updating the TP (Transponder) List Updating the software on a Satlink WS-6933 satellite

    • Authorized Distributors: Check the website of the company you bought the unit from (e.g., Emitor, local satellite shops).
    • Satellite Forums: Communities like Satellites.co.uk or Techkings.org often have verified firmware uploads.
    • Direct request: Contact your seller via email — many will send the correct .bin or .upd file.

    Open the upgrade application on your PC. It should detect the device automatically or require you to select the correct COM port. Load File: Execute the Update: that triggers when a signal

    Backup First: If your software supports it, use the "Upload from device" option in the Flash Loader to save your current settings/TP list before overwriting them.

    1. Power OFF WS-6933.
    2. Press and hold OK button.
    3. While holding, power ON. The screen may stay dark or show “Upgrade Mode”.
    4. Release OK.

    Part 2: Identifying Your Current Firmware Version

    You cannot proceed without knowing your current software version. Installing the wrong file can brick your device.