Satlink Ws6979 Software Upgrade Free Free (4K 2024)

Satlink WS-6979 handheld combo meter, software upgrades are typically performed via the

Step 5: Post-Upgrade Steps

3. Test Critical Functions

• Signal meter: Connect to a known satellite (e.g., Hotbird 13E) and check if MER/BER readings are stable.
• DiSEqC 1.2: Move a motorized dish to verify positioning.
• Spectrum analyzer: Sweep a range to check for live peaks.

Upgrade procedure

1. Power off the Satlink WS-6979 receiver.
2. Insert the USB flash drive into the receiver’s USB port.
3. Power on the receiver and wait for it to boot.
4. Access the receiver’s menu using the remote or front panel:

   Prep steps

   1. Download the correct WS-6979 firmware file from the manufacturer’s official site or a trusted source that specifically lists WS-6979 compatibility. Confirm the file name and version match your model.
   2. Format your USB flash drive to FAT32. (Backup any files first.)
   3. Copy the firmware file (usually a .bin or .abs file) to the root directory of the USB drive — do not place it inside folders.