Sp Flash Tool Stuck At [work] Download Da 100 -

When the SP Flash Tool gets stuck at Download DA 100% (often accompanied by the red progress bar),

When the SP Flash Tool gets stuck at "Download DA 100%", it typically indicates a communication failure between the software and the device's boot ROM after the initial handshake is complete. The "Download DA" phase is when the tool sends the Download Agent (the code that handles the actual flashing) to the phone's internal memory; sticking at 100% means the DA was sent but never successfully executed or "responded" back. Common Causes & Solutions Stuck at Download DA 100% - Hovatek

and select a specific DA file for your device model if provided with your firmware. sp flash tool stuck at download da 100

Driver Conflicts: Outdated or multiple conflicting VCOM/Preloader drivers can stall the process.

Swap to a different USB cable (preferably the original) and try a different USB port on the PC. Tool Settings When the SP Flash Tool gets stuck at

Here is how you can troubleshoot and resolve this common MediaTek (MTK) flashing issue: 1. Check Your Drivers

7. Last Resort: Low-Level Bypass (Auth File)

If your device requires auth_sv5.auth file (found in stock ROM's MTK_AllInOne_DA.bin): Check Your Drivers 7

Modern MediaTek devices often have a "Secure Boot" feature that blocks unauthorized flashing. If your progress bar is stuck at 100%, it might be waiting for authentication.

Try selecting different DA files from the SP Flash Tool folder.