Stenhoj Ds2 Manual |top|

Comprehensive Guide to Stenhoj DS2 Lift Operation and Maintenance

Foundation Requirements: It specifies strict concrete standards (e.g., minimum 100mm–150mm depth and specific PSI/N/mm² ratings) to ensure stability under heavy loads. stenhoj ds2 manual

• Putting the DS2 into learn mode (usually via a hidden push button or jumper).
• Pairing a new transmitter (Stenhoj KT-6, KT-12, or other models).
• Clearing all stored IDs for security purposes.

Common troubleshooting

• Lift won’t rise: check power supply, pump motor, hydraulic fluid level, and pump check valve.
• Slow lifting: low hydraulic fluid, air in system, or worn pump. Bleed per manual.
• Leaks: tighten fittings, replace seals or hoses. Do not operate with significant leaks.
• Locks won’t engage: inspect lock mechanism for debris or deformation; test release linkage.

"The new guy has never seen a DS2," Elias grunted. "This thing was built when safety meant 'heavy steel,' not 'software override.' The manual says we need to manually actuate the relief valve while applying counter-pressure." Comprehensive Guide to Stenhoj DS2 Lift Operation and

Electrical Supply: Most DS2 models operate on a 3-phase power supply (400V). Putting the DS2 into learn mode (usually via