Tableau Correspondance Carburateur Walbro Top

Tableau de Correspondance Carburateur Walbro Top : Le Guide Ultime pour les Propriétaires de Motos et de Véhicules Off-Road

  1. Find the stamping. Look on the side of the carburetor body (usually near the idle screw). You will see "TOP-2" or "TOP-3" stamped faintly into the metal.
  2. Measure the bolt spacing. TOP carbs typically have 32mm center-to-center mounting bolts. If yours is 30mm, you likely have an HDA series, not a TOP.
  3. Check the choke. If your carb has a primer bulb on the side, it is not a standard TOP. You likely have a WT or WA series.

Voici un guide pour vous aider à identifier les correspondances les plus courantes. tableau correspondance carburateur walbro top

| Type de moteur | Cylindrée | Puissance | Transmission | Carburateur Walbro | | --- | --- | --- | --- | --- | | 2 temps | 50cc | 10ch | Manuel | WA-1 | | 2 temps | 100cc | 20ch | Manuel | WB-2 | | 4 temps | 250cc | 30ch | Automatique | WT-3 | Tableau de Correspondance Carburateur Walbro Top : Le

| Walbro Model | Series | Carb bore (mm) | Typical Use (Engine) | OEM Brand | OEM Part # (example) | Rebuild kit | |--------------|--------|----------------|----------------------|-----------|----------------------|-------------| | WT-215 | Top | 15.08 | 45-55cc chainsaw | Stihl | 1129 120 0600 | K10-WT | | WT-194 | Top | 15.08 | 50cc saw | Husqvarna | 537 23 06-01 | K10-WT | | WT-499 | Top | 13.5 | 35cc trimmer | Echo | VH5000A | K20-WT | | WA-167 | Top | 16.0 | 65-75cc saw | Jonsered | 504 44 88-01 | K10-WA | | WYJ-1 | Top | 17.5 | 80-90cc pro saw | Stihl | 1128 120 0601 | K10-WYJ | | WLA-1 | Top | 12.7 | 25-30cc blower | RedMax | 2350-12121 | K10-WLA | Find the stamping

  1. Walbro WT-499 : Le plus polyvalent pour TOP 139F. Prix ~25€.
  2. Walbro WYJ-257 : Clone économique du WT, fonctionne parfaitement sur 154F. Prix ~15€.
  3. Walbro HDA-255 : Indispensable pour TOP 177F des motoculteurs BCS ou Ferrari.
  4. Walbro WT-1193 : Pour les groupes électrogènes TOP 7500W.
  5. Walbro WT-972+ : Souvent vendu avec le kit membrane déjà monté.

Walbro uses standardized kits for specific families of carburetors. Below are common correspondences for major models: Kit membrane carburateur Walbro K20WAT, K20-WAT - Amazon

  • Flow Rate: The volume of air-fuel mixture the carburetor can supply to the engine.
  • Jet Sizes: Information on the jet sizes available for tuning the carburetor.
  • Idle Mixture Screws: Adjustments for fine-tuning the air-fuel mixture at idle speeds.
  • Main Nozzle: Size and type of the main nozzle.