To connect a Huawei device to a PC via a hardware test point, you must install the Huawei USB COM 1.0 driver
On older Huawei phones (Nova 2i, P9 Lite, Y6 2018, etc.): test point driver huawei
Connection: While holding the short, plug the USB cable into your PC. If successful, the PC will "ding" and recognize a new device. 3. Installation Guide (HUAWEI USB COM 1.0) To connect a Huawei device to a PC
The Huawei Test Point Driver is a tiny piece of software that bridges a massive gap. It turns a paperweight back into a phone by allowing low-level communication with a bricked CPU. it loads the bootloader
When a Huawei phone is powered on normally, it loads the bootloader, then the kernel, then Android. If the software is corrupt (wrong flash, locked FRP, erased boot), the phone cannot enter fastboot or system.
HiSuite/PC Manager: While primarily for consumer use, installing HUAWEI PC Manager often includes the latest official base drivers. Test Point Execution Process
| Method | Success Rate (Huawei) | Difficulty | |--------|----------------------|-------------| | eRecovery (Download latest firmware) | Low (on FRP locked) | Easy | | Hisuite Proxy + Rollback | Medium (bootloop) | Medium | | OTG USB FRP bypass | Very low (patched in EMUI 12+) | Easy | | IDT with locked bootloader | None (requires test points) | N/A | | Professional box (Octopus/Chimera) | High (still may need test points on newer models) | Professional |