It sounds like you're encountering an error with the VCDS Loader by Kolimer (a cracked version of Ross-Tech's VCDS diagnostic software for VW/Audi vehicles). The message "failed 2 updated" typically appears when the loader tries to bypass the software's online activation/update check but runs into a problem.
Unplug the cable, restart your PC, and then reinstall the VCDS software and drivers provided with your specific loader version. Use the Correct Launch Order Ensure the cable is from the PC during VCDS installation. After installation, copy the VCDSLoader.exe vcds loader kolimer failed 2 updated
Open Device Manager, find the Ross-Tech device, right-click it, and select Uninstall device. Check the box for "Delete the driver software for this device". It sounds like you're encountering an error with
Go to the Update tab and click Check for updates to force the firmware to re-flash correctly. Manual Installation for Clones (Kolimer Loader) Use the Correct Launch Order Ensure the cable
The error "Failed 2 Updated" (often appearing as "Failed to update" or similar in VCDS loaders like Kolimer) typically indicates a communication or version mismatch between the cracked loader and the VCDS software. Review of VCDS Loader by Kolimer
Here’s a useful troubleshooting piece for the error: “VCDS Loader Kolimer failed 2 updated” — typically seen when trying to use a cloned or patched version of VCDS (VAG-COM diagnostic software) with Kolimer’s loader.