Verigy 93k Tester Manual May 2026

The Verigy V93000 (93k) documentation suite, managed by Advantest, consists of modular guides covering SmarTest software (7 or 8), hardware configurations, and DUT board design, accessible through the Technical Documentation Center. Comprehensive manuals and datasheets are available for various test head types and cards, including digital Pin Scale 400 and analog MBAV8 cards. Access Advantest's technical documentation at ADVANTEST CORPORATION V93000 Technical Documentation - Advantest

The Verigy V93000 (now Advantest) is a high-performance system-on-a-chip (SoC) tester. While the official full manual is proprietary and typically accessed through the Advantest Technical Documentation Center (TDC), this guide outlines the standard operating procedures and manual testing workflows for engineers. 1. Hardware System Overview verigy 93k tester manual

The Cooling System: High-performance testing generates heat; the V93K typically uses liquid or air-chilled systems to maintain thermal stability. 2. Software Interface: SmarTest 7 vs. SmarTest 8 The Verigy V93000 (93k) documentation suite, managed by

Per-Pin vs. Per-Site Timing

Many users accidentally set timing per pin when they need per site. The manual clarifies that per-site timing requires a "Site Controller" and doubles the memory usage. Mainframe : The mainframe houses the tester's power

• Mainframe: The mainframe houses the tester's power supply, control circuitry, and interface modules.
• Test Head: The test head contains the measurement circuitry and is connected to the device under test (DUT).
• Controller: The controller is a user interface that allows you to configure and operate the tester.

• Wafer probing: The device is used for wafer probing, where it measures the electrical characteristics of devices on a wafer.
• Device testing: The Verigy 93K tester is used for device testing, where it measures the electrical characteristics of packaged devices.
• Reliability testing: The device is used for reliability testing, where it measures the electrical characteristics of devices under various stress conditions.

Overview of a Typical Tester Manual

1. Introduction: Overview of the tester, its purpose, and applications.
2. Safety and Precautions: Essential safety information to ensure user safety and prevent damage to the equipment.
3. System Description: Detailed description of the tester's components, architecture, and functionality.
4. Operating Instructions: Step-by-step guide on how to set up, operate, and maintain the tester.
5. Calibration and Verification Procedures: Instructions on how to calibrate the tester and verify its performance to ensure accuracy.
6. Troubleshooting: Guide to identifying and solving common problems.
7. Technical Specifications: Detailed technical specifications of the tester, including its capabilities and limitations.
8. Programming and Software Reference: For programmable testers, this section would cover the software interface, command set, and programming examples.

This transition has complicated the user experience. While the core V93000 architecture remains, documentation for newer cards or software updates (such as SmarTest 8 or 9) is integrated into a broader knowledge base. The searchability of these manuals has improved with digital integration, yet the fragmentation of information across release notes, application notes, and core manuals remains a hurdle. An engineer often finds themselves cross-referencing three separate documents to diagnose a single calibration error or driver update.