Xta-7000 Temperature Controller Manual ((top)) May 2026

The is an intelligent digital temperature controller from the XT-7000 series, typically manufactured by brands like GONGBAO or QIHUAFSW. It features a dual-bank LED display and supports both PID and ON/OFF control methods for high-precision industrial applications. Key Specifications Accuracy: ±0.5% to ±1.0% of full scale. Control Methods: PID (with auto-tuning) or ON/OFF.

Chapter 6: The Auto-Tuning Procedure (The Gold Feature)

If you have printed the xta-7000 temperature controller manual but skipped to this chapter, stop. Auto-tuning is the single most valuable feature.

The XTA-7000 (XMTG-7000 series) is a versatile digital PID controller featuring advanced, configurable temperature management for industrial and laboratory applications. It supports dual-display functionality, J-type thermocouple inputs (up to 750∘C750 raised to the composed with power cap C xta-7000 temperature controller manual

. Ensure your wiring on the back matches the sensor type to avoid "LL" or "HH" error messages, which usually mean a disconnected or faulty sensor. 5. Critical Precautions Power Down:

• [ ] Sensor type (InP) matches physical probe.
• [ ] Output mode (Out) matches your relay/SSR/driver.
• [ ] Auto-tuning performed after first power-up.
• [ ] Alarm relay wired to a safety cut-off.
• [ ] Unit earthed and sensor wires shielded.

If the temperature fluctuates too much, use Auto-Tuning to let the controller find the best PID parameters. Enter the parameter menu (usually by long-pressing for ~3 seconds). Locate the parameter and change its value to AT indicator The is an intelligent digital temperature controller from

The XTA-7000 Series Temperature Controller is a versatile, microprocessor-based instrument designed for precise thermal management in industrial environments. Known for its high accuracy and robust PID control algorithms, it is a staple in plastics processing, food packaging, and laboratory furnaces.

Err: Internal memory error. Try cycling the power or performing a factory reset. 7. Maintenance Tips [ ] Sensor type (InP) matches physical probe

Simply press the up or down arrows from the main screen to adjust the SV. Press SET to save. C. Auto-Tuning (AT)