Control Universal Articco Th-msur-40 Manual ((new)) File

The Articco TH-MSUR-40 is a 4-in-1 universal remote capable of controlling Air Conditioners (AC), TVs, DVDs, and Audio systems. Setup & Programming Methods

5. Installation & Wiring

Terminal Block Diagram:

If you have the code list, you can enter the four-digit number directly. control universal articco th-msur-40 manual

  • Terminal Block (Lower Section): High voltage (115V/230V) inputs and outputs.
  • Terminal Block (Upper Section): Low voltage connections for the Temperature Probe (NTC) and optional Door Switch.
  • Microprocessor: The chip that holds the logic.
  • Jumpers: Small plastic caps connecting pins that determine voltage and defrost type.

| Parameter | Description | Setting Range (Typical) | | :--- | :--- | :--- | | F0 | Setpoint (Desired temperature) | -40°C to +40°C | | F1 | Differential (Hysteresis) | 0.5°C to 10°C | | F2 | Probe type selection | 1 = NTC, 2 = PT1000 | | F3 | Defrost interval (time) | 1 to 24 hours | | F4 | Defrost duration (max time) | 1 to 60 minutes | | F5 | Fan post-run delay (after compressor stops) | 0 to 10 minutes | | F6 | Sensor offset calibration | -5°C to +5°C | | F7 | Password lock | 0 = unlocked, 1 = locked | The Articco TH-MSUR-40 is a 4-in-1 universal remote

Backlight: Press the LIGHT button to illuminate the screen for 10 seconds. | Parameter | Description | Setting Range (Typical)

This method is best if you do not know the specific code for your A/C brand. Step 1: Manually turn on your air conditioner. Step 2: Point the remote directly at the indoor unit.

Press and hold the SELECT button for 5 seconds until the code digits on the LCD screen flash.